Washer displays F32 and may not fill correctly or may stop shortly after starting.

This repair may involve working with high voltage components or water connections. Always unplug the appliance before removing any panels.

If you are not confident in your ability to perform this repair safely, we strongly recommend contacting a professional technician.

Possible Causes

Failed pressure switch, blocked pressure hose, wiring fault to the pressure switch, control misreading level.

Safety first: Unplug the washer and shut off the water supply.

Step-by-step checks:

1. Inspect pressure hose: Remove the top panel and check the hose from the tub to the pressure switch for kinks, blockages, or disconnections.
2. Clean hose: Detach the hose and blow through it to clear soap residue. Reattach securely.
3. Test pressure switch: Disconnect the switch and check continuity across its terminals while applying gentle air pressure. Replace if contacts do not change as expected.

When to call a technician: If a new pressure switch does not resolve F32, the main control may be at fault.

Medium 3/5

Water Level Pressure Switch

Check Price on Amazon

We may earn a commission from links on this page.