AEG washing machine shows E32, often during or after filling, sometimes with incorrect water levels

This repair may involve working with high voltage components or water connections. Always unplug the appliance before removing any panels.

If you are not confident in your ability to perform this repair safely, we strongly recommend contacting a professional technician.

Possible Causes

Incorrect pressure sensor signal, Loose or damaged pressure hose, Faulty pressure sensor, Control board misreading sensor

Safety first: Unplug the washer.

Repeat E31 checks: Inspect and clear the pressure hose and air chamber, and re-seat the electrical connector.
Check for kinks: Ensure the pressure hose is not kinked or pinched under the top cover.
Reset machine: After checks, reconnect power and run a rinse and spin cycle to see if the error clears.

If E32 returns, the pressure sensor or main control board may need replacement by a professional.

Hard 4/5

AEG Electronic Pressure Sensor

Check Price on Amazon

We may earn a commission from links on this page.