AEG washing machine shows E70 series error, often related to temperature sensing

This repair may involve working with high voltage components or water connections. Always unplug the appliance before removing any panels.

If you are not confident in your ability to perform this repair safely, we strongly recommend contacting a professional technician.

Possible Causes

Open or shorted NTC sensor, Loose NTC connector, Damaged wiring to NTC, Control board input fault

Safety first: Unplug the washer.

Locate NTC: Usually mounted in the heater bracket or directly in the tub.
Test NTC: Measure resistance at room temperature. A reading of near 0 ohms (short) or infinite (open) indicates failure.
Check connector and wiring: Ensure good contact and no damage.

Replace the AEG NTC sensor if faulty. If the sensor and wiring are good, the control board may be defective.

Medium 3/5

AEG NTC Temperature Sensor

Check Price on Amazon

We may earn a commission from links on this page.