F7E5
Amana
Shifter / Actuator Failure (Top-Load Models)
Washer displays F7E5 and may not agitate or spin correctly; may switch directions erratically.
Advertisements
Safety Warning
This repair may involve working with high voltage components or water connections. Always unplug the appliance before removing any panels.
If you are not confident in your ability to perform this repair safely, we strongly recommend contacting a professional technician.
Advertisements
Possible Causes
Failed shift actuator, broken shifter arm, wiring harness issue to actuator, mechanical binding in splutch assembly
How to Fix / Troubleshooting
Safety: Unplug the washer and lay it back carefully if needed to access the bottom. Support it securely.
- Access the actuator:
- Remove the rear or bottom panel.
- Locate the shift actuator mounted on the side of the gearcase or splutch assembly.
- Inspect wiring: Check the actuator connector and harness for damage or loose pins. Reseat the connector.
- Check splutch and linkage: Inspect the plastic splutch and linkage for broken parts or obstructions that prevent shifting between agitate and spin.
- Replace shift actuator if faulty:
- Remove mounting screws and disconnect the actuator.
- Install the new Amana-compatible shift actuator, ensuring the arm engages correctly with the splutch.
- Reassemble and run a diagnostic cycle to verify proper shifting.
Advertisements
Repair Difficulty
Medium
3/5
Required Part
Shift Actuator
Check Price on Amazon
We may earn a commission from links on this page.
Advertisements