Amica Dispenser Overflow / Spray Pattern Fault

The Amica washing machine's door glass fogs heavily, and small leaks occur from the dispenser area during filling.

This repair may involve working with high voltage components or water connections. Always unplug the appliance before removing any panels.

If you are not confident in your ability to perform this repair safely, we strongly recommend contacting a professional technician.

Possible Causes

Blocked dispenser outlet, Excessive water pressure, Machine not level front-to-back, Cracked dispenser housing.

Safety first: Unplug the washer and close the water taps before removing the dispenser.

1. Clean dispenser and housing: Remove the drawer and clean all channels. Check for detergent buildup at the rear outlet.
2. Inspect housing for cracks: Look for splits where water could escape; replace the dispenser housing if damaged.
3. Adjust water pressure: If household water pressure is very high, partially close the tap or install a pressure reducer.
4. Level the machine: Ensure the washer is not tilted forward, as this can cause water to spill from the drawer.

Medium 3/5

Detergent Dispenser Housing

Check Price on Amazon

We may earn a commission from links on this page.