E23
Candy
Drain Pump Control Error
Washer shows E23 and may not drain or may stop mid-cycle.
Advertisements
Safety Warning
This repair may involve working with high voltage components or water connections. Always unplug the appliance before removing any panels.
If you are not confident in your ability to perform this repair safely, we strongly recommend contacting a professional technician.
Advertisements
Possible Causes
Shorted drain pump, Wiring fault to pump, Failed pump triac on PCB, Water ingress on PCB
How to Fix / Troubleshooting
Safety: Unplug the washer.
- Test pump coil: Disconnect the pump connector and measure resistance. Replace the pump if open or shorted.
- Inspect wiring: Check the harness from pump to PCB for damage.
- Check PCB: Look for burning near the pump control components. If damaged, the PCB must be replaced.
Because E23 often indicates an electronic control issue, professional repair is recommended.
Advertisements
Repair Difficulty
Professional Required
5/5
Advertisements