Washer will not power on at all; no lights or display, completely dead.

Safety first: Verify the outlet with another appliance before opening the washer. Unplug the washer before internal checks.

• Check outlet and breaker: Confirm the wall outlet has power and the circuit breaker or fuse has not tripped.
• Inspect power cord: Look for cuts, burns, or kinks. Replace if damaged.
• Access power entry: Remove the rear or top panel to locate the noise filter/power entry board. Check for a blown fuse or burnt components.
• Replace fuse (if user-serviceable): If the fuse is visibly blown and rated appropriately, replace it. If it blows again immediately, there is a deeper fault that requires professional diagnosis.
• Control board: If power is present at the noise filter but the control panel remains dead, the main PCB or user interface board may be defective and require replacement.