Washer shows F24 and may not start or may stop during wash; temperature-related fault.
Safety Warning
This repair may involve working with high voltage components or water connections. Always unplug the appliance before removing any panels.
If you are not confident in your ability to perform this repair safely, we strongly recommend contacting a professional technician.
Possible Causes
How to Fix / Troubleshooting
Safety first: Unplug the washer and allow it to cool if it has overheated.
Verify sensor and heater:
- Test the NTC sensor as in F05 and F23. Replace if readings are unstable or out of range.
- Check that the heater is not energized when it should be off (requires live-voltage testing by a trained person). A heater stuck on can overheat water and trigger F24.
If components test good: The main control may be misinterpreting temperature data. Replacement of the control board is recommended through a professional service provider.
Repair Difficulty
Required Part
We may earn a commission from links on this page.