Washer drum does not spin or spin is very weak, E3 displayed on Dawlance washer.

Safety first: Unplug the washer before removing any panels or touching internal components.

• Check for overload or unbalanced load: Open the door or lid and remove some clothes if the drum is overfilled. Redistribute heavy items (like blankets) evenly and try the spin cycle again.
• Inspect drive belt: Remove the rear panel. Check if the belt is still on the motor pulley and drum pulley. If the belt is off, frayed, or broken, replace it with a compatible Dawlance drive belt and ensure proper tension.
• Check motor capacitor (if fitted): On some Dawlance top-load and semi-automatic models, a start/run capacitor is mounted near the motor. Look for bulging, leaking, or burnt smell. Replace with the same µF rating and voltage if defective.
• Inspect motor brushes (universal motor models): If your Dawlance front-loader uses a brushed motor, remove the motor and check the carbon brushes. If they are worn down to a few millimeters, replace both brushes as a pair.
• Test spin again: Reassemble, plug in, and run a spin-only program. If E3 persists, the motor windings or motor control circuit on the main PCB may be faulty.

For PCB or motor winding faults, professional diagnosis by a Dawlance technician is recommended.