Dawlance
No Power / Dead Appliance
Washer is dead, no lights or response when power button is pressed.
Advertisements
Safety Warning
This repair may involve working with high voltage components or water connections. Always unplug the appliance before removing any panels.
If you are not confident in your ability to perform this repair safely, we strongly recommend contacting a professional technician.
Advertisements
Possible Causes
Blown internal fuse on PCB, Faulty power cord, Defective on/off switch, Failed main control PCB power supply section
How to Fix / Troubleshooting
Safety first: Ensure the wall socket is switched off before unplugging or plugging in the washer.
- Check outlet and breaker: Test the wall socket with another appliance. Reset any tripped circuit breaker.
- Inspect power cord and plug: Look for cuts, burns, or loose pins. Replace the cord if damaged.
- Try a different socket: Plug the Dawlance washer directly into a known-good wall outlet without an extension.
- Internal checks (advanced): Unplug the washer, remove the top cover, and inspect the main PCB for a blown fuse or burnt components. Replace the fuse only with the same rating and investigate the cause of failure.
If the washer remains dead after these checks, the main PCB or power switch may be faulty and should be serviced by a professional.
Advertisements
Repair Difficulty
Hard
4/5
Required Part
Main Control PCB
Check Price on Amazon
We may earn a commission from links on this page.
Advertisements