Washer shows E32; water level readings appear unstable (overfilling or underfilling).

This repair may involve working with high voltage components or water connections. Always unplug the appliance before removing any panels.

If you are not confident in your ability to perform this repair safely, we strongly recommend contacting a professional technician.

Possible Causes

Incorrectly installed pressure hose, Air leak in pressure hose, Faulty pressure sensor, Control board analog input fault

Safety: Unplug the washer.

Inspect for air leaks: Remove the top panel and carefully examine the pressure hose for pinholes, cracks, or loose fittings. Replace if any damage is found.
Ensure proper routing: The hose should rise smoothly without sharp bends or kinks that could trap water.
Replace sensor: If the hose is intact and E32 persists, install a new pressure sensor.
Control board check: If a new sensor does not resolve the issue, the main control board may be defective and should be tested by a technician.

Hard 4/5

Water Level Pressure Sensor

Check Price on Amazon

We may earn a commission from links on this page.