Washer shows E44; door status sensing error.

This repair may involve working with high voltage components or water connections. Always unplug the appliance before removing any panels.

If you are not confident in your ability to perform this repair safely, we strongly recommend contacting a professional technician.

Possible Causes

Defective door lock sensor circuit, Loose connector at door lock, Faulty main control board input, Damaged harness

Safety: Disconnect power.

Reseat connectors: Access the door lock and unplug/replug the connector several times to clean contacts.
Inspect harness: Check for broken or frayed wires between the lock and control.
Replace door lock: If wiring is intact, replace the door lock assembly.

If E44 remains after replacing the lock, the main control board likely needs service.

Hard 4/5

Door Lock Assembly

Check Price on Amazon

We may earn a commission from links on this page.