Washer displays E56; high motor current detected; may stop mid-spin.

This repair may involve working with high voltage components or water connections. Always unplug the appliance before removing any panels.

If you are not confident in your ability to perform this repair safely, we strongly recommend contacting a professional technician.

Possible Causes

Seized drum bearings, Foreign object between inner and outer tub, Overloaded drum, Shorted motor winding

Safety: Disconnect power.

Check drum rotation: Spin the drum by hand. If it is stiff, noisy, or grinds, suspect bearing or foreign object issues.
Remove foreign objects: Inspect the drum holes with a flashlight for bra wires or other items protruding. Remove if visible.
Reduce load: Try running a small load to see if the error occurs only when heavily loaded.
Service bearings/motor: If mechanical drag is present, bearing replacement or motor replacement may be required and is typically a professional repair.

Professional Required 5/5

Drum Bearing Kit

Check Price on Amazon

We may earn a commission from links on this page.