Electrolux Door Boot / Gasket Leak

Washer leaks water from the front door area during wash or spin.

This repair may involve working with high voltage components or water connections. Always unplug the appliance before removing any panels.

If you are not confident in your ability to perform this repair safely, we strongly recommend contacting a professional technician.

Possible Causes

Torn or punctured door boot seal, Debris trapped between boot and glass, Loose boot clamp, Excessive suds foaming over gasket

Safety: Unplug the washer and turn off water supply before inspecting for leaks.

Inspect boot: Pull back the rubber door boot and look for tears, holes, or worn areas, especially at the bottom.
Clean seal: Wipe away lint, coins, or foreign objects trapped in the folds of the gasket.
Check clamps: Ensure the inner and outer retaining clamps are tight and properly seated.
Replace boot: If damaged, replace the door boot with an OEM Electrolux bellows, following a step-by-step guide or technician assistance.

Hard 4/5

Door Boot Seal

Check Price on Amazon

We may earn a commission from links on this page.