Electrolux Internal Hose or Pump Leak

Washer leaks water from underneath or at the rear during operation.

This repair may involve working with high voltage components or water connections. Always unplug the appliance before removing any panels.

If you are not confident in your ability to perform this repair safely, we strongly recommend contacting a professional technician.

Possible Causes

Cracked tub-to-pump hose, Loose hose clamp on drain or recirculation hose, Leaking drain pump seal, Cracked outer tub

Safety: Unplug the washer and shut off water supply. Expect water when opening panels.

Inspect while running (cautious): With panels removed and extreme caution around live parts, briefly run a fill or wash to observe where water emerges.
Check hoses and clamps: Tighten or reposition any loose clamps. Replace hoses that show cracks or bulges.
Examine pump: Look for water dripping from the pump body or shaft area. Replace the pump if leaking.

Cracked outer tubs usually require tub replacement and professional service.

Hard 4/5

Tub-to-Pump Hose

Check Price on Amazon

We may earn a commission from links on this page.