How to Fix / Troubleshooting

Safety first: Unplug the washer and turn off water supply.

Step-by-step checks:

Identify internal valves: Consult the Grundig service diagram for your model to locate any recirculation or dosing valves.
Inspect hoses and valves: Remove hoses connected to the internal valve and check for blockages from lint or detergent residue. Clean thoroughly.
Test valve coils: Measure resistance of the valve coils with a multimeter. Replace any coil that is open or shorted.
Check wiring: Ensure connectors to the valve are secure and wires are not damaged.
Replace faulty valve: If the valve is mechanically stuck or the coil is defective, replace the valve assembly with the correct Grundig part.

Washer shows E19; internal valve or recirculation system malfunction (on models with recirculation or detergent dosing).

Possible Causes