Washer displays E24; water inlet valve control circuit fault.

This repair may involve working with high voltage components or water connections. Always unplug the appliance before removing any panels.

If you are not confident in your ability to perform this repair safely, we strongly recommend contacting a professional technician.

Possible Causes

Shorted inlet valve coil, Shorted triac or relay on PCB, Wiring short to valve, Moisture on control board

Safety first: Unplug the washer and turn off water supply.

Step-by-step checks:

Test inlet valve coils: Disconnect the valve connectors and measure resistance. Replace the valve assembly if any coil is shorted or open.
Inspect wiring: Check the harness from PCB to valve for damage or moisture.
Inspect PCB: Look for burnt components in the valve control area. If present, replace the main PCB.

Professional Required 5/5

Water Inlet Valve

Check Price on Amazon

We may earn a commission from links on this page.