E22
Haier
Motor Current / Inverter Error
Washer displays E22; abnormal current detected in motor circuit.
Advertisements
Safety Warning
This repair may involve working with high voltage components or water connections. Always unplug the appliance before removing any panels.
If you are not confident in your ability to perform this repair safely, we strongly recommend contacting a professional technician.
Advertisements
Possible Causes
Shorted motor winding, Damaged inverter board, Loose motor harness, Water ingress on motor or PCB
How to Fix / Troubleshooting
Safety first: Unplug the washer and allow any internal moisture to dry before working on electronics.
- Inspect wiring: Remove the rear and top panels to inspect the motor harness and inverter board connections. Reseat all connectors.
- Check for moisture: Look for signs of water leaks near the motor or control boards. Fix any leaks before replacing components.
- Test motor windings: With a multimeter, measure resistance between motor terminals and to ground. Replace the motor if windings are shorted or open.
- If motor tests good: The inverter or main PCB is likely faulty and should be replaced by a qualified technician.
Advertisements
Repair Difficulty
Professional Required
5/5
Required Part
Motor Inverter Board
Check Price on Amazon
We may earn a commission from links on this page.
Advertisements