Washer displays E24; door lock circuit electrical fault.

This repair may involve working with high voltage components or water connections. Always unplug the appliance before removing any panels.

If you are not confident in your ability to perform this repair safely, we strongly recommend contacting a professional technician.

Possible Causes

Shorted door lock coil, Broken wiring to lock, Burned connector at PCB, Faulty main PCB output

Safety first: Unplug the washer before accessing the door lock or control board.

Inspect door lock: Remove the front panel trim and check the door lock assembly and its connector for burn marks or melting.
Test lock coil: Measure resistance across the lock terminals. Replace the lock if the coil is open or shorted.
Check harness: Follow the wiring from the lock to the PCB, looking for damage or loose plugs.
If lock and wiring are OK: The PCB output to the lock may be faulty and require replacement by a technician.

Medium 3/5

Door Lock Assembly

Check Price on Amazon

We may earn a commission from links on this page.