Haier Overheating Component / Belt Slippage

Washer emits a burning smell during operation.

This repair may involve working with high voltage components or water connections. Always unplug the appliance before removing any panels.

If you are not confident in your ability to perform this repair safely, we strongly recommend contacting a professional technician.

Possible Causes

Slipping or misaligned drive belt, Foreign object rubbing on drum, Overheating motor, Electrical short on PCB

Safety first: Immediately stop the washer, unplug it, and do not continue using it until the cause is found.

Inspect belt and pulleys: Remove the rear panel and check for a glazed or frayed belt and signs of rubber dust. Replace the belt if damaged.
Check for obstructions: Look for items trapped between the tub and drum or rubbing on the belt or pulley.
Smell the motor and PCB area: If there is a strong electrical burning odor, the motor or control board may be failing and should be inspected by a technician.

Hard 4/5

Drive Belt / Drive Motor

Check Price on Amazon

We may earn a commission from links on this page.