Haier
No Power / Dead Control
Washer will not power on; no lights or display, machine appears completely dead.
Advertisements
Safety Warning
This repair may involve working with high voltage components or water connections. Always unplug the appliance before removing any panels.
If you are not confident in your ability to perform this repair safely, we strongly recommend contacting a professional technician.
Advertisements
Possible Causes
Blown line fuse on PCB, Faulty power cord, Defective power switch, Failed main control board
How to Fix / Troubleshooting
Safety first: Ensure the outlet has power and avoid working on live circuits. Unplug the washer before opening any panels.
- Check outlet: Plug in another appliance to confirm the wall socket works. Reset any tripped breakers or GFCI outlets.
- Inspect power cord: Look for cuts, burns, or kinks. Replace the cord if damaged.
- Test power switch: On models with a mechanical power button, access the switch behind the control panel and test for continuity when pressed.
- Inspect PCB fuse: Remove the control panel and check for a small fuse on the main board. Replace only with the same rating if blown, and investigate why it failed (e.g., surge, short).
- If still dead: The main control board is likely faulty and should be replaced by a qualified technician.
Advertisements
Repair Difficulty
Hard
4/5
Required Part
Main Control Board (PCB)
Check Price on Amazon
We may earn a commission from links on this page.
Advertisements