Washer leaves clothes soaking wet at the end of the cycle; spin seems weak or does not occur.

Safety first: Unplug the washer before checking filters or internal parts.

• Check for error codes: If an F05/F11 is present, address drainage first.
• Redistribute load: Remove some items or redistribute heavy items evenly and run a spin-only cycle.
• Clean pump filter: Open and clean the pump filter to ensure full drainage.
• Check drain hose height: Ensure the drain hose is installed at the correct height per the manual; too low can cause siphoning and poor spin.
• Inspect motor brushes: If the drum turns slowly or not at high speed, check and replace worn brushes.
• Pressure switch: If the machine never reaches spin and thinks water is still present, inspect the pressure switch and hose for blockages.