The washer will not start and displays 'E dO', indicating the door or lid is open even when it appears closed.

Safety: Unplug the washer before adjusting hinges or removing panels.

• Verify door closure: Close the door firmly and check that it is flush with the front panel. If the door sags, the hinges may be worn or loose.
• Adjust hinges: Tighten hinge screws and adjust the door so the latch aligns with the door lock opening.
• Inspect actuator/strike: Confirm the plastic or metal piece that presses the door switch is intact. Replace if cracked or missing.
• Test door switch: Access the door switch behind the front panel. Use a multimeter to test continuity when the door is closed. If the switch does not close electrically, replace it.