Huebsch
No Power / Dead Control
Washer will not power on at all; no lights or display.
Advertisements
Safety Warning
This repair may involve working with high voltage components or water connections. Always unplug the appliance before removing any panels.
If you are not confident in your ability to perform this repair safely, we strongly recommend contacting a professional technician.
Advertisements
Possible Causes
Blown line fuse on control board, Faulty power cord, Tripped household breaker, Failed main control board power supply
How to Fix / Troubleshooting
Safety: Ensure the breaker is off and the washer is unplugged before opening any panels.
- Check outlet and breaker: Test the wall outlet with another appliance and reset any tripped breakers or GFCI outlets.
- Inspect power cord: Look for cuts, burns, or loose connections at the terminal block. Tighten screws and replace the cord if damaged.
- Access control board: Remove the top or rear panel to reach the main control. Check for an onboard fuse; test it with a multimeter and replace with the exact type and rating if blown.
- Board replacement: If the fuse is good but the board shows no signs of life (no LEDs, no response), replace the main control board.
Advertisements
Repair Difficulty
Medium
3/5
Required Part
Main Control Board
Check Price on Amazon
We may earn a commission from links on this page.
Advertisements