F70
Inglis
User Interface Communication Failure
Washer displays F70 and becomes unresponsive; communication error between user interface and main control.
Advertisements
Safety Warning
This repair may involve working with high voltage components or water connections. Always unplug the appliance before removing any panels.
If you are not confident in your ability to perform this repair safely, we strongly recommend contacting a professional technician.
Advertisements
Possible Causes
Loose UI ribbon cable, failed user interface, failed main control, moisture in console
How to Fix / Troubleshooting
Safety First: Unplug the washer before removing the console.
Step-by-step checks:
- 1. Remove console: Take off the top panel and console screws, then tilt the console forward.
- 2. Inspect ribbon cable: Disconnect and reconnect the flat ribbon or harness between UI and main control. Look for cracks or corrosion.
- 3. Dry moisture: If you see condensation or detergent residue, clean and dry the area and correct any dispenser leaks.
- 4. Replace UI board: If buttons or display are erratic, install a new user interface assembly.
- 5. Replace main control if needed: If a new UI does not resolve F70, replace the main control board.
Advertisements
Repair Difficulty
Medium
3/5
Required Part
User Interface Control Board
Check Price on Amazon
We may earn a commission from links on this page.
Advertisements