Inglis Long Drain Fault

Top-load Inglis washer displays Ld (Long Drain) and stops with water in the tub.

This repair may involve working with high voltage components or water connections. Always unplug the appliance before removing any panels.

If you are not confident in your ability to perform this repair safely, we strongly recommend contacting a professional technician.

Possible Causes

Clogged drain pump, blocked drain hose, kinked standpipe hose, failing drain pump motor

Safety First: Unplug the washer and be prepared for water spillage.

Step-by-step checks:

1. Inspect drain hose: Check for kinks or clogs. Remove from standpipe and flush with water.
2. Access pump: Tilt the washer back or remove front/bottom panel to reach the pump. Remove any debris from the pump inlet and outlet.
3. Test pump: Spin the impeller by hand. If stiff or broken, replace the pump. Check electrical resistance per tech sheet.

Medium 3/5

Drain Pump Assembly

Check Price on Amazon

We may earn a commission from links on this page.