Top-load Inglis washer displays LF (Long Fill) and may stop before wash begins.

Safety First: Unplug the washer and turn off water supply before disconnecting hoses.

Step-by-step checks:

• 1. Verify water pressure: Open both hot and cold faucets fully. Check household water pressure at another tap.
• 2. Clean inlet screens: Disconnect hoses from the washer and clean the small screens inside the valve ports with a soft brush.
• 3. Check hoses: Ensure hoses are not kinked or collapsed. Replace old rubber hoses with braided stainless if swollen or cracked.
• 4. Test fill: Reconnect hoses, turn water on, and run a fill cycle. If water trickles in or one temperature does not fill, replace the water inlet valve assembly.