Washer makes loud banging or knocking noises during spin, sometimes walking across the floor.

Safety First: Do not place hands near a spinning drum. Unplug the washer before internal inspection.

Step-by-step checks:

• 1. Redistribute load: Pause the cycle, open the door/lid, and rearrange clothes evenly. Avoid washing single heavy items alone.
• 2. Check leveling: Ensure all four feet are firmly on the floor and the washer is level. Adjust and lock the feet.
• 3. Verify shipping bolts: On new front-load Inglis washers, confirm that all rear shipping bolts have been removed. Operating with bolts installed causes severe vibration.
• 4. Inspect suspension/shocks: If noise persists with balanced loads, inspect suspension rods (top-load) or shock absorbers (front-load) for wear or oil leakage. Replace as a set.