Inglis
No Power / Dead Control
Washer will not power on at all, no lights or display, completely dead.
Advertisements
Safety Warning
This repair may involve working with high voltage components or water connections. Always unplug the appliance before removing any panels.
If you are not confident in your ability to perform this repair safely, we strongly recommend contacting a professional technician.
Advertisements
Possible Causes
Tripped breaker or blown fuse, faulty power cord, failed line filter, defective main control board
How to Fix / Troubleshooting
Safety First: Ensure your hands are dry when working around electrical outlets. Unplug the washer before opening any panels.
Step-by-step checks:
- 1. Check household power: Verify the circuit breaker is not tripped. Reset if necessary. Test the outlet with another appliance.
- 2. Inspect power cord: Look for cuts, burns, or loose plug blades. Replace the cord if damaged.
- 3. Test outlet voltage: Use a multimeter to confirm 120V at the outlet. If no voltage, contact an electrician.
- 4. Inspect internal power path: Remove the top or rear panel and locate the line filter and main control. Check for burnt components or loose connectors.
- 5. Replace failed components: If the line filter is open or the control board shows burn marks and no LEDs, replace with OEM parts.
Advertisements
Repair Difficulty
Medium
3/5
Required Part
Main Control Board (CCU)
Check Price on Amazon
We may earn a commission from links on this page.
Advertisements