Washer displays E51; often associated with a motor control triac short.

This repair may involve working with high voltage components or water connections. Always unplug the appliance before removing any panels.

If you are not confident in your ability to perform this repair safely, we strongly recommend contacting a professional technician.

Possible Causes

Shorted drive motor, Shorted triac on the main control board, Wiring short between the motor and board, Water intrusion on the motor connector

Safety First: Unplug the washer immediately. Do not continue to operate with this error.
Inspect Motor and Wiring: Access the Insignia drive motor and check for a burnt smell, melted insulation, or water on connectors.
Test Motor Windings: Use a multimeter to check for shorts between motor terminals and to chassis ground.
Replace Shorted Motor: If the motor is shorted, replace the motor assembly and inspect the wiring harness for damage.
Replace Main Board: A shorted motor often damages the control triac. Replace the main control board after correcting the motor issue.

Professional Required 5/5

Main Control Board / Drive Motor

Check Price on Amazon

We may earn a commission from links on this page.