F25
Kenmore
Drive Motor Tachometer Error
Washer displays F25; may not spin properly or may stop during spin.
Advertisements
Safety Warning
This repair may involve working with high voltage components or water connections. Always unplug the appliance before removing any panels.
If you are not confident in your ability to perform this repair safely, we strongly recommend contacting a professional technician.
Advertisements
Possible Causes
Failed tachometer on drive motor, loose motor connector, damaged motor wiring, faulty motor control board
How to Fix / Troubleshooting
Safety First: Unplug the washer before removing panels.
Steps:
- Access motor: Remove rear panel. Locate the drive motor at the back of the tub.
- Inspect connector: Unplug the motor connector and inspect for bent pins, corrosion, or burnt marks. Clean and reconnect.
- Check harness: Follow the harness from the motor to the motor control board and main control, looking for damage.
- Test motor/tach: With a multimeter and service manual, test motor windings and tachometer resistance. Replace the drive motor if readings are out of spec.
- MCU check: If motor tests good, replace the motor control board.
Advertisements
Repair Difficulty
Hard
4/5
Required Part
Drive Motor Assembly
Check Price on Amazon
We may earn a commission from links on this page.
Advertisements