LE
Kenmore
Motor Locked Error
Washer will not spin or agitate; displays LE; may hum briefly then stop.
Advertisements
Safety Warning
This repair may involve working with high voltage components or water connections. Always unplug the appliance before removing any panels.
If you are not confident in your ability to perform this repair safely, we strongly recommend contacting a professional technician.
Advertisements
Possible Causes
Overloaded drum, seized drive motor, foreign object jammed between tub and basket, failed rotor position sensor (on direct-drive models)
How to Fix / Troubleshooting
Safety First: Unplug the washer before inspecting the drum or motor.
Steps:
- Reduce load: Remove some items and try a smaller load to see if the error clears.
- Check for obstructions: Spin the drum by hand. If it is hard to turn or grinds, inspect between the inner basket and outer tub for foreign objects (coins, bra wires).
- Access motor: Remove rear or bottom panel to access the drive motor. Inspect for burnt smell or visible damage.
- Test rotor sensor (if equipped): On direct-drive Kenmore models, check the rotor position sensor for cracks or loose mounting. Replace if damaged.
Advertisements
Repair Difficulty
Medium
3/5
Required Part
Drive Motor Assembly
Check Price on Amazon
We may earn a commission from links on this page.
Advertisements