Kenmore Internal Hose or Pump Leak

Washer leaks water from underneath, especially during fill or drain.

Advertisements

Safety Warning

This repair may involve working with high voltage components or water connections. Always unplug the appliance before removing any panels.

If you are not confident in your ability to perform this repair safely, we strongly recommend contacting a professional technician.

Advertisements

Possible Causes

Cracked tub-to-pump hose, loose hose clamp, leaking drain pump, cracked outer tub

How to Fix / Troubleshooting

Safety First: Unplug the washer and shut off water supply. Use caution when tipping the washer; get assistance if needed.

Steps:

  • Inspect from below: Remove lower front panel (front-load) or tilt the washer back (top-load) and look for water trails or mineral deposits to trace the leak source.
  • Check hoses and clamps: Tighten any loose clamps on the tub-to-pump and pump-to-drain hoses. Replace hoses that are cracked or swollen.
  • Inspect pump: Look for water dripping from the pump body or shaft. Replace the drain pump if leaking.
  • Outer tub: If the outer tub is cracked, replacement is extensive and may not be cost-effective; consult a technician.
Advertisements

Repair Difficulty

Medium 3/5

Required Part

Tub-to-Pump Hose
Check Price on Amazon

We may earn a commission from links on this page.

Advertisements