Kenmore
Overfilling / Inlet Valve Stuck Open
Washer overfills or continues filling with water even when unplugged; risk of flooding.
Advertisements
Safety Warning
This repair may involve working with high voltage components or water connections. Always unplug the appliance before removing any panels.
If you are not confident in your ability to perform this repair safely, we strongly recommend contacting a professional technician.
Advertisements
Possible Causes
Mechanically stuck water inlet valve, blocked pressure hose, faulty water level pressure switch
How to Fix / Troubleshooting
Safety First: Immediately shut off both hot and cold water supply valves and unplug the washer to stop filling.
Steps:
- Check valve behavior: With the washer unplugged and water turned back on briefly, see if water flows into the tub. If it does, the inlet valve is stuck open and must be replaced.
- Inspect pressure hose: Remove top panel and check the pressure hose from tub to pressure switch for disconnection, cracks, or clogs. Clear or replace as needed.
- Test pressure switch: If valve is not stuck but overfill occurs, test and replace the water level pressure switch.
Advertisements
Repair Difficulty
Medium
3/5
Required Part
Water Inlet Valve Assembly
Check Price on Amazon
We may earn a commission from links on this page.
Advertisements