E32
Midea
Chronic Unbalance Detection
Washer shows E32; unbalanced load detected repeatedly, spin aborted.
Advertisements
Safety Warning
This repair may involve working with high voltage components or water connections. Always unplug the appliance before removing any panels.
If you are not confident in your ability to perform this repair safely, we strongly recommend contacting a professional technician.
Advertisements
Possible Causes
Worn suspension springs or dampers, Uneven floor or unlevel washer, Excessive single heavy item load, Faulty unbalance sensor (if equipped)
How to Fix / Troubleshooting
Safety first: Unplug the washer before inspecting suspension components.
- Level the washer: Adjust the leveling feet so the washer is stable and does not rock. Use a level front-to-back and side-to-side.
- Load distribution: Avoid washing a single heavy item alone. Add a few smaller items to balance the load.
- Inspect suspension: For top-loaders, check suspension rods and springs for wear or breakage. For front-loaders, inspect shock absorbers for leaks or looseness. Replace worn parts with Midea-compatible suspension components.
- Unbalance sensor: Some models have a vibration/unbalance sensor attached to the tub or cabinet. Ensure it is securely mounted and wiring is intact.
Advertisements
Repair Difficulty
Medium
3/5
Required Part
Suspension Springs / Shock Absorbers
Check Price on Amazon
We may earn a commission from links on this page.
Advertisements