E50
Midea
General Motor Fault
Washer displays E50; general motor error, drum may not turn or may jerk.
Advertisements
Safety Warning
This repair may involve working with high voltage components or water connections. Always unplug the appliance before removing any panels.
If you are not confident in your ability to perform this repair safely, we strongly recommend contacting a professional technician.
Advertisements
Possible Causes
Faulty motor, Defective inverter/control board, Loose or damaged motor wiring, Faulty hall sensor
How to Fix / Troubleshooting
Safety first: Unplug the washer before accessing the motor or control board.
- Check drum movement: Rotate the drum by hand to ensure it is not mechanically jammed.
- Inspect motor harness: Reseat the motor connector and inspect the harness for damage.
- Test hall sensor and windings: Use a multimeter to verify hall sensor output and motor winding resistance according to Midea service data. Replace faulty components.
- Control board: If motor and sensors test good, the inverter or main PCB is likely defective and should be replaced by a qualified technician.
Advertisements
Repair Difficulty
Hard
4/5
Advertisements