Washer displays E60; general heating system error.

This repair may involve working with high voltage components or water connections. Always unplug the appliance before removing any panels.

If you are not confident in your ability to perform this repair safely, we strongly recommend contacting a professional technician.

Possible Causes

Failed heater element, Faulty NTC sensor, Loose heater wiring, Control board heater circuit failure

Safety first: Unplug the washer and allow it to cool before working near the heater.

Inspect heater and sensor: Access the heater at the bottom of the tub and check for loose connectors or burnt terminals.
Test heater and NTC: Measure resistance of both components and compare to Midea specifications. Replace any that are out of range.
Check control board: If components are good, the heater relay or control circuit on the PCB may be faulty and require board replacement.

Hard 4/5

Heating Element

Check Price on Amazon

We may earn a commission from links on this page.