Midea
No Spin / Spin Cycle Failure
Washer does not spin at the end of the cycle; clothes are soaking wet.
Advertisements
Safety Warning
This repair may involve working with high voltage components or water connections. Always unplug the appliance before removing any panels.
If you are not confident in your ability to perform this repair safely, we strongly recommend contacting a professional technician.
Advertisements
Possible Causes
Unbalanced load protection, Faulty lid/door switch, Worn motor or belt, Defective spin control on main board
How to Fix / Troubleshooting
Safety first: Unplug the washer before internal inspection.
- Redistribute load: Open the door/lid, redistribute clothes evenly, and remove some items if overloaded. Run a spin-only cycle.
- Check lid/door switch: Ensure the machine detects the lid/door as closed. Test the switch or lock for continuity and replace if faulty.
- Inspect belt and motor: Check for a loose or broken belt and signs of motor failure (burning smell, no hum). Replace as needed.
- Control board: If mechanical parts are fine, the spin control circuit on the PCB may be defective and require replacement.
Advertisements
Repair Difficulty
Medium
3/5
Required Part
Lid Switch / Door Lock Assembly
Check Price on Amazon
We may earn a commission from links on this page.
Advertisements