Midea
Internal Hose or Pump Leak
Washer leaks water from underneath the cabinet.
Advertisements
Safety Warning
This repair may involve working with high voltage components or water connections. Always unplug the appliance before removing any panels.
If you are not confident in your ability to perform this repair safely, we strongly recommend contacting a professional technician.
Advertisements
Possible Causes
Cracked tub-to-pump hose, Loose hose clamp, Leaking drain pump seal, Split inlet hose inside cabinet
How to Fix / Troubleshooting
Safety first: Unplug the washer and turn off water supply. Tilt the washer only with assistance to avoid injury.
- Locate leak: Remove rear or lower front panel and run a short fill/drain cycle while observing (use a flashlight). Identify the source of dripping.
- Hoses and clamps: Tighten any loose clamps and replace hoses that show cracks or bulges.
- Pump inspection: If water appears around the pump body or shaft, replace the drain pump assembly.
- Retest: After repairs, run another cycle and check for leaks before reassembling panels.
Advertisements
Repair Difficulty
Medium
3/5
Advertisements