Midea
Start Command / User Interface Fault
Washer powers on but will not start cycle when Start/Pause is pressed.
Advertisements
Safety Warning
This repair may involve working with high voltage components or water connections. Always unplug the appliance before removing any panels.
If you are not confident in your ability to perform this repair safely, we strongly recommend contacting a professional technician.
Advertisements
Possible Causes
Faulty Start/Pause button, Child lock enabled, Door not detected as closed, UI-to-main board communication issue
How to Fix / Troubleshooting
Safety first: Unplug the washer before removing the control panel.
- Check child lock: Look for a key/lock icon on the display. Disable child lock according to the user manual (often by holding specific buttons).
- Verify door closure: Ensure the door is fully closed and the door lock clicks. If not, inspect the door lock assembly.
- UI test: If other buttons respond but Start/Pause does not, the button or touchpad may be faulty. Remove the control panel and inspect for cracked solder joints or damaged switches.
- Communication: Reseat the ribbon cable or harness between the UI and main board. If still unresponsive, the UI board may need replacement.
Advertisements
Repair Difficulty
Medium
3/5
Required Part
User Interface Board
Check Price on Amazon
We may earn a commission from links on this page.
Advertisements