Washer vibrates excessively and moves across the floor during the spin cycle.

Safety first: Unplug the washer before tipping or adjusting the feet.

• Step 1 – Check transport bolts: For recently installed machines, ensure all rear transport bolts and spacers have been removed according to the installation manual.
• Step 2 – Level the washer: Adjust the front and rear feet so the machine is stable and does not rock. Tighten the lock nuts.
• Step 3 – Floor reinforcement: Place the washer on a solid, level surface. Avoid weak wooden floors; consider using a vibration mat.
• Step 4 – Inspect the suspension: If vibration persists, inspect the shock absorbers and springs for wear or damage and replace them as needed.