Washer is leaking water from the front, under the door.

Safety first: Unplug the washer and turn off the water supply before inspecting for leaks.

Steps to check and address front leaks:

• Inspect door gasket: Open the door and carefully examine the rubber seal all around for tears, holes, or hardened areas. Pay particular attention to the bottom, where damage is common.
• Remove foreign objects: Check the fold of the gasket for coins, bra wires, or debris that could break the seal. Remove any objects and wipe the gasket clean.
• Check retaining band: Ensure the outer metal or plastic clamp around the gasket is seated correctly and is tight. Refit it if it has come loose.
• Control detergent use: Use only HE (high-efficiency) detergent and the recommended dose to prevent oversudsing, which can cause leaks over the door.
• Replace gasket if damaged: If you find tears or severe wear, remove the front retaining band, pull off the old gasket, fit a new Siemens-compatible door seal, and carefully reinstall both inner and outer clamps.

When to call a technician: If you are not comfortable removing the front panel or fitting a new seal, have a professional perform the replacement to avoid future leaks.