Washer displays F29, door will not unlock at end of cycle, clothes trapped inside.
Safety Warning
This repair may involve working with high voltage components or water connections. Always unplug the appliance before removing any panels.
If you are not confident in your ability to perform this repair safely, we strongly recommend contacting a professional technician.
Possible Causes
How to Fix / Troubleshooting
Safety first: Unplug the washer. Do not force the door open with tools that could break the glass or damage the seal.
Step-by-step:
- Wait for cool-down: On some models, the door will not unlock until the drum temperature is safe. Allow 5–10 minutes.
- Manual release: Access the door lock area (through the lower front panel or by pulling back the gasket) and locate the manual release tab on the lock assembly. Pull it to unlock the door.
- Inspect lock and strike: Check for physical damage or misalignment. Replace broken parts.
- Test lock: With power off, test the lock coil and switches for continuity. Replace the lock if defective.
When to call a technician: If the door cannot be opened safely or if the control is not sending an unlock signal, professional service is advised.
Repair Difficulty
Required Part
We may earn a commission from links on this page.