Whirlpool Load Sensing / Pressure System Malfunction

Washer fills and drains repeatedly without progressing, or seems to endlessly sense and not wash.

This repair may involve working with high voltage components or water connections. Always unplug the appliance before removing any panels.

If you are not confident in your ability to perform this repair safely, we strongly recommend contacting a professional technician.

Possible Causes

Blocked pressure hose, faulty pressure sensor, control software glitch, excessive suds interfering with sensing

Safety first: Unplug the washer before accessing internal components.

Step-by-step:

Run calibration (if available): Many Whirlpool washers have a calibration or diagnostic cycle—refer to the tech sheet and run it.
Inspect pressure hose and sensor: Clear the hose and verify the sensor is properly mounted and connected.
Reduce detergent: Use less HE detergent to minimize suds that can confuse sensing.

When to call a technician: If calibration and basic checks do not resolve the issue, the pressure sensor or control may need replacement.

Medium 3/5

Water Level Pressure Sensor

Check Price on Amazon

We may earn a commission from links on this page.