Washer leaves clothes with detergent residue or not fully rinsed, even after normal cycles.

Safety first: Unplug the washer and turn off water before removing hoses.

Step-by-step:

• Use HE detergent correctly: Reduce detergent amount and use only HE detergent.
• Clean dispenser: Remove the detergent drawer and clean all compartments and siphon caps. Clean the dispenser housing of buildup.
• Check water pressure: Ensure both hot and cold supply valves are fully open. Remove inlet hoses and clean the screens on the water inlet valve.
• Run extra rinse: Use the extra rinse option for heavily soiled loads.

When to call a technician: If water flow into the tub is weak even with good house pressure, the inlet valve may be failing and should be replaced.