Wine cooler displays dO or DO and beeps; the interior light may stay on.

Safety: Most checks can be done with power on. Unplug the unit before removing panels or handling wiring.

• Confirm door closure: Close the door firmly and check that it is flush with the cabinet. Look for items or shelves preventing full closure.
• Inspect gasket and hinges: Ensure the gasket is not warped and that hinges are tight and not sagging. Adjust hinges if the door is misaligned.
• Test door switch: Locate the door switch (mechanical plunger or magnetic reed) usually near the top or side of the opening. Press the switch manually; the interior light should turn off and the alarm should stop. If not, the switch may be faulty.
• Check magnet (for reed switch types): Verify that the small magnet embedded in the door frame is present and aligned with the reed switch. Replace or reposition if missing or loose.
• Replace door switch if defective: Unplug the unit, remove the switch from the liner, disconnect wiring, and install a new Amana-compatible door switch. Reconnect wires and snap or screw the switch back into place.
• Test operation: Restore power, close the door, and confirm that the dO code clears and the light turns off.