BODEGA43 Single-Zone Cooling Failure in Dual-Zone Unit

Dual-zone BODEGA43 wine cooler: the upper zone cools but the lower zone is warm (or vice versa).

Advertisements

Safety Warning

This repair may involve working with high voltage components or water connections. Always unplug the appliance before removing any panels.

If you are not confident in your ability to perform this repair safely, we strongly recommend contacting a professional technician.

Advertisements

Possible Causes

Zone-specific evaporator fan failure, faulty zone temperature sensor, diverter damper stuck closed, partial refrigerant restriction to one evaporator.

How to Fix / Troubleshooting

Safety: Unplug the unit before accessing any internal components.

Steps:

  • Compare zones: Use thermometers in both zones to confirm the temperature difference.
  • Check zone fans: Listen for fan operation in each zone. Access the non-cooling zone's evaporator fan and test/replace it if it is not running.
  • Sensor test: Test the temperature sensor for the affected zone and replace it if readings are incorrect.
  • Air damper: Some models use a damper to share cold air. Inspect it and ensure it moves freely.

If mechanical and electrical components are functional but one zone still does not cool, a sealed system issue specific to that evaporator may exist and will require a technician.

Advertisements

Repair Difficulty

Hard 4/5

Required Part

Zone Temperature Sensor / Evaporator Fan Motor
Check Price on Amazon

We may earn a commission from links on this page.

Advertisements