Interior light does not turn on when the door is opened, but the cooler otherwise works normally.

Safety: Unplug the unit before working on the light or switch.

Steps:

• Test door switch: Verify that the door switch or reed sensor is working (interior fan or display may also respond to door). Replace if it does not change state.
• Access light module: Remove the interior light cover and inspect the LED module for damage.
• Check connections: Ensure the light connector is firmly seated and wires are intact.
• Replace LED module: Install a new Fagor LED light assembly if the original is defective.
• Main board: If the light and switch are good but no voltage is supplied to the light, the main PCB light driver may be faulty and require replacement.