Water pooling at the bottom of the wine cooler or leaking onto the floor.

Safety first: Unplug the unit before removing panels. Use towels to absorb water and prevent slipping.

Steps to stop water leaks:

• 1. Locate drain system: Remove interior shelves and the rear panel to find the evaporator drain trough and hole.
• 2. Clear blockage: Use a soft brush, pipe cleaner, or compressed air to clear debris from the drain hole and tube.
• 3. Check drain tube routing: At the rear bottom, ensure the drain tube leads into the external drain pan above the compressor and is not kinked or disconnected.
• 4. Inspect drain pan: Look for cracks or overflow. Replace the "drain pan" if damaged.
• 5. Verify door seal: A poor seal can cause excess frost and defrost water. Replace the gasket if needed.