Oven displays F7E0; may not heat or may shut down unexpectedly.

This repair may involve working with high voltage components or water connections. Always unplug the appliance before removing any panels.

If you are not confident in your ability to perform this repair safely, we strongly recommend contacting a professional technician.

Possible Causes

Failed relay on EOC, Shorted triac or power device, Internal power supply fault on EOC

Safety first: Turn off power at the breaker. The control board carries live 240V.

Step-by-step checks:

Visual inspection: Remove the control panel and inspect the EOC for burnt relay contacts, cracked solder joints, or scorched areas.
Check loads: Verify that bake and broil elements are not shorted to ground, as this can damage relays. Test each element with a multimeter.
Replace EOC: If elements test good and F7E0 persists, replace the EOC.

Hard 4/5

Electronic Oven Control Board (EOC)

Check Price on Amazon

We may earn a commission from links on this page.